eG-05012B
Effective 03-05
Catalog Section 40
(00-02-0593)
Digital Auto-Start/Stop/Throttling
Engine Controller
eGUARD Controller
■
Compatible with Electronic (ECU)
and Standard (MPU) engines
■
■
■
J1939 Ready – works directly with our
MurphyLink J1939 PowerView gages
Automatic Speed Control - throttles
engine speed based on analog inputs
Engine Diagnostics – provides most
common descriptive faults when con-
nected to electronic engines
Description
Features
Here are some of the unique features only Murphy’s
eGUARD can offer you at our competitive price.
Standard Components
–
–
–
–
–
–
–
–
–
24 - Digital inputs
The eGUARD is a state-of-the-art controller. It will
meet virtually all of your engine-driven equipment
application requirements. The eGUARD has been
designed from the ground up to control today’s elec-
tronic engines using J1939 and can easily control
the traditional non-electronic engines.
8 - Analog inputs (one battery dedicated)
1 - Magnetic pickup input
8 - 20A Form “C” relays
1 - RS232 port
●
Throttling Input: The eGUARD can be config-
ured to control engine speed using most types of
analog input devices (0-5v, 1-5v or 4-20 mA).
1 - RS485 port
●
Throttling Output: CANbus J1939* or incre-
ment/decrement relay pulse.
1 - RS232/RS485 port
1 - J1939 port
1 - 64 x 128 pixels full graphic
LCD display with backlight
1 - 12-position keypad
The eGUARD can be configured to automatically
or manually operate most types of applications,
from a simple start/stop sequence to complex auto-
matic throttling. Pumps, Compressors, Chippers,
Grinders and Power Units are just a few of the ideal
industrial applications for the eGUARD.
The eGUARD controller can maintain constant
pressure, flow or level by automatically increasing
or decreasing engine speed.
*(when supported by the ECU manufacturer)
●
●
●
Compatibility: Accepts Magnetic Pick-up (MPU)
or ECU J1939 speed signals.
Field Configurable: Allows password protected
configuration changes through the keypad.
Field Programmable: Flash-based microprocessor
allows for easy upgrades or reconfigurations
using a PC or laptop.
–
Optional Accessories
●
PVA Series Gages (Bulletin: PV-02125B)
Remote Relay Board
Mimic Annunciator allows for wired remote
●
●
Warranty
●
●
Sealing: Maintains NEMA4 and IP65 rating when
properly mounted in a rated enclosure.
J1939 Ready; Works directly with Murphy’s
J1939-ready PowerView gages, just plug and go,
no sender required.
A limited warranty on materials and workmanship is
given with this FW Murphy product.
operation and monitoring (Call Murphy IPD for
more information)
A copy of the warranty may be viewed or printed by
eG-05012B page 1 of 2
|
Miele Ice Maker K11820SD User Manual
Miller Electric Welding System 185 DX User Manual
MTD Tiller 21A 410 022 User Manual
Multiquip Drums AR13D User Manual
NEC Computer Monitor 60000531 User Manual
NEC Projector WT600 User Manual
NewAir Beverage Dispenser AK 200 User Manual
Nikon Camera Lens 1928 User Manual
OPTI UPS Network Card RS1200 User Manual
Panasonic Air Conditioner CW C80YU User Manual