Oki Printer Accessories C5150 User Manual

C5150/C5200/C5400/C5400n  
Duplex Option  
Installation Instructions  
Oki 42158411 Duplex Unit  
7. If you will always be using duplex  
printing, go into the printer menu  
and change the default setting for  
DUPLEX to ON:  
2. Right click the Postscript  
Install the Duplexer  
1. Unpack the duplexer and remove  
the shipping materials.  
emulation printer icon, then click  
Properties.  
3. Next:  
Windows XP, 2000 and NT 4.0:  
click the Device Settings tab.  
Windows Me and 98: click the  
Device Options tab.  
2. Turn off the printer.  
a. Press + until you see PRINT  
3. Insert the duplexer through the  
hinged door in the back of the  
printer.  
MENU on the display.  
b. Press ENTER.  
c. Press + until you see DUPLEX  
4. Under Installable Options, click  
on the display.  
Duplex and select Installed.  
5. Click OK, then close the Printers  
d. Press ENTER.  
(Printers and Faxes) dialog box.  
e. Press + to change the setting  
Hiper-C Driver (C5150, C5200)  
from OFF to ON.  
1. Click Start Settings Printers  
[Printers and Faxes for XP].  
The Printers (Printers and Faxes)  
dialog box opens.  
f. Press ENTER to engage the  
setting, then press ON-LINE to  
save the setting and exit the  
menu.  
2. Right click the printer icon, then  
click Properties.  
Activate the  
Duplexer in the  
Printer Driver  
3. Next:  
Windows XP, 2000 and NT 4.0:  
click the Device Option(s) tab.  
Windows Me and 98: click the  
Printer Properties tab, then click  
the Device Option tab.  
4. Turn on the printer.  
5. Print out the Menu Map.  
Windows®  
O
N
LINE  
BACK  
ENTER  
4. Select Duplex Option Unit.  
PCL Driver (C5400, C5400n)  
MENU  
5. Click OK, then close the Printers  
CANCEL  
Click Start Settings Printers  
[Printers and Faxes for XP].  
The Printers (Printers and Faxes)  
dialog box opens.  
(Printers and Faxes) dialog box.  
Macintosh®  
a. Press + one or more times until  
INFORMATION MENU appears  
on the display.  
OS 8.x and 9.x (C5400n)  
8. Right click the PCL printer icon,  
then click Properties  
1. Activate Chooser from the Apple  
b. Press ENTER twice.  
menu.  
9. Click the Device Option(s) tab.  
10.Click Duplex Option Unit.  
The MenuMap prints.  
2. Select LaserWriter 8.  
3. Click Printer Setup.  
4. Click Configure.  
6. Check to be sure that “DUPLEX  
installed” shows in the information  
at the top of the first page. If it  
doesn’t, turn off the printer and  
push firmly on the duplexer to be  
sure it is firmly seated in the  
11.Click OK, then close the Printers  
(Printers and Faxes) dialog box.  
5. Change the Duplex Unit setting to  
Postscript Emulation Driver  
(C5400n)  
1. Click Start Settings Printers  
[Printers and Faxes for XP].  
The Printers (Printers and Faxes)  
dialog box opens.  
Installed.  
6. Click OK twice.  
7. Close Chooser.  
printer, then turn on the printer and  
print the MenuMap again.  
OS X to X.1 (C5400n)  
No activation is required.  
(continued on back)  
© 2004 Oki Data Americas, Inc.  
58368601  
 

Minolta Digital Camera Maxxum 9000 User Manual
MSi Computer Hardware G31M3 User Manual
Multiquip Appliance Trim Kit MVH406DSCPAS User Manual
Murray Lawn Mower 7800864 User Manual
NetComm Switch NP3024 User Manual
NETGEAR Network Router WNDR4300 User Manual
Nikon Camcorder D3x User Manual
OEM Systems Speaker System RS 82B User Manual
Oricom Cordless Telephone ECO600 User Manual
Palsonic CRT Television 5155PF User Manual