Panasonic Network Card 2SC3312 User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SC3312  
Silicon NPN epitaxial planar type  
For low-frequency and low-noise amplification  
Complementary to 2SA1310  
Unit: mm  
4.0 0.2  
2.0 0.2  
Features  
0.75 max.  
Optimum for high-density mounting  
Allowing supply with the radial taping  
Low noise voltage NV  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
Rating  
Unit  
V
+0.20  
0.45  
–0.10  
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
60  
+0.20  
0.45  
–0.10  
(2.5) (2.5)  
55  
V
0.7 0.1  
7
100  
V
1: Emitter  
2: Collector  
3: Base  
Collector current  
IC  
ICP  
PC  
Tj  
mA  
mA  
mW  
°C  
1
2
3
Peak collector current  
Collector power dissipation  
Junction temperature  
Storage temperature  
200  
NS-B1 Package  
300  
150  
Tstg  
55 to +150  
°C  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VCEO  
VEBO  
VBE  
Conditions  
Min  
60  
55  
7
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Base-emitter voltage  
IC = 10 µA, IE = 0  
IC = 2 mA, IB = 0  
V
IE = 10 µA, IC = 0  
VCE = 1 V, IC = 30 mA  
VCB = 20 V, IE = 0  
VCE = 20 V, IB = 0  
VCE = 5 V, IC = 2 mA  
V
1
V
Collector-base cutoff current (Emitter open)  
Collector-emitter cutoff current (Base open)  
Forward current transfer ratio *  
Collector-emitter saturation voltage  
Transition frequency  
ICBO  
0.1  
1
µA  
µA  
ICEO  
hFE  
180  
700  
1
VCE(sat) IC = 100 mA, IB = 10 mA  
V
fT  
VCB = 5 V, IE = −2 mA, f = 200 MHz  
200  
MHz  
mV  
Noise voltage  
NV  
VCE = 10 V, IC = 1 mA, GV = 80 dB  
150  
Rg = 100 k, Function = FLAT  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
R
S
T
hFE  
180 to 360  
260 to 520  
360 to 700  
Publication date: March 2003  
SJC00128BED  
1
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Miele Clothes Dryer T8428C User Manual
Miele Convection Oven H 4541 User Manual
MSi Computer Hardware MS 6534 User Manual
Nikon Camcorder CT3A0311 6MN15911 03 User Manual
Nikon Camcorder S6200 User Manual
Niles Audio TV Video Accessories C5 RFWM User Manual
Oregon Clock Radio TR118 User Manual
Palsonic DVD Player DVD3000 User Manual
Panasonic Air Cleaner EH366 User Manual
Panasonic Computer Drive CF VFS271 User Manual